mick core

What is the correct procedure to shim the body after you mix up the shims like a knucklehead.

GDaina

trial and error...keep adding or removing shims till the doors line up with the panels and gaps are no larger than 1/8"

Alan 71

Hi Mick,
GD's advice is right on.
I would start with 2 shims at each location so I could take 1 or 2 off as needed so as to not end up with six shims some place. It takes some experience to learn what happens when you add a shim because it may help one place but cause a problem somewhere else.
Good Luck!
Regards,
Alan