Hydroboost help.
Thread Starter
Instructor
Joined: Mar 2007
Posts: 103
Likes: 8
From: Cataumet MA
Hydroboost help.
Not too long ago, I found installation instructions, along with the parts required to put my own Hydroboost system together. I believe that it also included all the lines and fittings that you would need. Now that I've decided that I want to do this conversion, I can't seem to come up with that article, in this forum, no matter how I search the forum. Anyone out there have a lead to that particular paper?
Thanks in advance for any info.
Thanks in advance for any info.
Last edited by Kfmorgan; Mar 10, 2009 at 03:56 PM.
Melting Slicks
Joined: May 2005
Posts: 2,486
Likes: 71
From: Elkhart Lake, Wisconsin
4th Gear
Joined: Nov 2006
Posts: 4
Likes: 0
I've just gone through 3 weeks of trying to get some answers on the hydratech. My problem that I just found out was with the pump. Pump should be between 2 and no more than 3.5 gpm around 900 to 1200 psi. Good luck directions I thought were a little confusing!
Burning Brakes
Joined: Feb 2005
Posts: 1,235
Likes: 0
From: Mesa AZ
the toughest thing is hooking up to the power steering control valve. the 2nd link Robrace posted is what i did for the control vlave. i scrounged up some fittings i had lying around and bought a few more . it's probably not the best way but it's been working great
Drifting
Joined: Aug 2004
Posts: 1,677
Likes: 1
From: Potomac Falls VA
I noticed the rebound as well while testing the brakes after bleeding. I think that is what freaked me out the most.
I appreciate everyones feedback. Makes me feel better about droppping the rear of the kwiklift and getting her our on the road again.
Shane
I appreciate everyones feedback. Makes me feel better about droppping the rear of the kwiklift and getting her our on the road again.
Shane
