creeping idle
Thread Starter
Instructor
Joined: Jun 2005
Posts: 156
Likes: 0
From: Liverpool NY
creeping idle
I have an edelbrock 750 and the idle seems to want to creep up when the engine is hot. I've adjusted the idle mixture with a vacuum (both out about 1 3/4ish turns) and the car seems to run very strong, but I just cant seem to get the car to idle at a constant rpm.
anybody have any thoughts?
anybody have any thoughts?
Racer
Joined: Dec 2007
Posts: 342
Likes: 29
From: vancouver washington
Well your not alone. My 600cfm edle does the same thing. I just adjusted to spec rmp when hot so on cold start after choke fast idle kicks off the engine idle is very low. Not too big a deal, I can live with it
Burning Brakes
Joined: Jul 2008
Posts: 876
Likes: 0
From: Canastota Ny
that is when you should be adjusting the vacuum is when the car is hot and choke is off. try doing it again this time when hot. adjust the idle air and then the idlle itself im sure you wont have the problem again.
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
Is your choke valve plate completely open when it has warmed up? If not, that's your problem. Follow adjustment instructions in the Chevy Chassis Service Manual for setting the choke (cold and hot).
