C3 Harness Bar preview
Thread Starter
Drifting
Joined: Aug 2000
Posts: 1,758
Likes: 4
From: Medford, Or
C3 Harness Bar preview
Vetteworks will be offering the C3 harness bar for '74 thru '77 soon! Check out my web page for more info.
Dan
http://www.vetteworksonline.com
[Modified by vettedan, 11:11 AM 3/18/2002]
Dan
http://www.vetteworksonline.com
[Modified by vettedan, 11:11 AM 3/18/2002]
Drifting
Joined: Feb 2002
Posts: 1,987
Likes: 3
From: Manchester, Dead Center in the Middle of TN 25 miles to Jack Daniels,10 miles to Geo Dickle, and .8 mile from the Liquor Store at I-24 Exit 114
St. Jude Donor '05
Re: C3 Harness Bar preview (vettedan)
Nice looking bar, I might be interested in one for an '80.
Nice looking CAR
Nice looking WEB- Site
Good info in your site, thanks for the info on the fan switching. JIM
Nice looking CAR
Nice looking WEB- Site
Good info in your site, thanks for the info on the fan switching. JIM
Thread Starter
Drifting
Joined: Aug 2000
Posts: 1,758
Likes: 4
From: Medford, Or
Re: C3 Harness Bar preview (C3Vettesrock)
groovyjay-The C3 harness Bar will start out at $250.00 w/out the crotch belt/fire extinguisher bracket. The combination crotch belt/Fire extinguisher bracket and the harness bar will be $350.00. The Simpson belt is not included. The crotch belt bracket can be made without a fire extinguisher bracket.
A C- I currently have no plans for eerier, unless there's interest. '68 thru '73 Corvette do not have a shoulder anchor post, which the harness bar needs. There is also a problem installing the harness bar on later C3 Corvette with the shoulder anchor post that hidden behind the panel.
PROSOUTH- Thanks for the complement. Are the Shoulder seat belt anchors hidden behind the panel on your '80 Corvette?
C3Vettesrock-You can buy a Simpson 3" belt f/x system for around $90.00 from Jeg's.
A C- I currently have no plans for eerier, unless there's interest. '68 thru '73 Corvette do not have a shoulder anchor post, which the harness bar needs. There is also a problem installing the harness bar on later C3 Corvette with the shoulder anchor post that hidden behind the panel.
PROSOUTH- Thanks for the complement. Are the Shoulder seat belt anchors hidden behind the panel on your '80 Corvette?
C3Vettesrock-You can buy a Simpson 3" belt f/x system for around $90.00 from Jeg's.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Drifting
Joined: Aug 2000
Posts: 1,758
Likes: 4
From: Medford, Or
Re: C3 Harness Bar preview (C3Vettesrock)
C3Vettesrock-The C3 harness Bar will start out at $250.00 w/out the crotch belt/fire extinguisher bracket. The combination crotch belt/Fire extinguisher bracket and the harness bar will be $350.00. The Simpson belt is not included. The crotch belt bracket can be made without a fire extinguisher bracket. Production will be in approx. two weeks.
Here is another picture of the harness bar. Note how the stock seat belt is still functional and hides a lot of the harness bar.
Here is another picture of the harness bar. Note how the stock seat belt is still functional and hides a lot of the harness bar.
Team Owner
Joined: May 2001
Posts: 29,745
Likes: 3
From: Exiled to Richmond, VA - Finally sold my house in Murfreesboro, TN ?? Corner of "Bumf*&k and 'You've got a purdy mouth'."
CI 6-7-8 Veteran
CI-VIII Burnout Champ
St. Jude Donor '06-'10, '13
Re: C3 Harness Bar preview (rainman69)
Someone REALLY needs to design one for the '78-'82 C3's !!
