Fuel Pump lines.....
Thread Starter
Melting Slicks
Joined: Feb 1999
Posts: 2,473
Likes: 10
From: New Paltz, New York USA
Fuel Pump lines.....
Hi, I just dropped in my new crate engine and put on my new fuel pump. My problem is that I cannot remember if there were rubber lines going from the end of the 2 steel lines to the bottom fittings on my pump.
I removed the old motor 4 years ago and can't remember what connected the lines to the bottom of the pump. I am guessing that it was rubber lines because there seems to be some kind of hose barb fitting on the 2 bottom fuel pump nipples. Thanks in advance.
I removed the old motor 4 years ago and can't remember what connected the lines to the bottom of the pump. I am guessing that it was rubber lines because there seems to be some kind of hose barb fitting on the 2 bottom fuel pump nipples. Thanks in advance.
Tech Contributor
Joined: Aug 1999
Posts: 14,379
Likes: 6,390
From: At my Bar drinking and wrenching in Lafayette Colorado
There are no rubber lines on the pressure side of the pump. The line from the pump outlet to the carb is steel with no rubber sections. The suction side of the pump uses a short rubber section from the steel line on the frame to the inlet of the pump. If the pump had a return line on it, there would also be a short rubber line running from the pump's return port to the return line on the frame.
Lars
Lars
Thread Starter
Melting Slicks
Joined: Feb 1999
Posts: 2,473
Likes: 10
From: New Paltz, New York USA
Grumpy427 & lars,
Thank you both very much. I have the steel line for the carb, I just could not remember about the other 2 lines. Thanks again. have a great day.
Thank you both very much. I have the steel line for the carb, I just could not remember about the other 2 lines. Thanks again. have a great day.
