Sidepipes and Angle plug heads
03-21-2002, 11:09 PM
#1
Le Mans Master
Thread Starter
Member Since: Mar 2002
Location: Life is Messy, Bring a mop
Posts: 7,049
Received 39 Likes
on
16 Posts
Sidepipes and Angle plug heads
Was looking at the Hooker site and noticed that it says their pipes won't fit with angle plug heads.
Anyone tried this? :cry
Anyone tried this? :cry
03-22-2002, 12:21 AM
#3
Racer
Re: Sidepipes and Angle plug heads (72rdstr)
Hi, a member by the name PASO has this set up.....he may have some information that is of some use to you? I hope this helps.
03-22-2002, 07:23 AM
#4
Drifting
Member Since: Feb 2000
Location: Clarksville,Tn,USA TN
Posts: 1,607
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sidepipes and Angle plug heads (Darcy Bast)
Depends on the heads...I have Trick Flow 23 degree angled heads and my Hooker side pipe headers fit fine. Call and talk to the people
Neil in Tenn
Neil in Tenn
03-22-2002, 10:01 AM
#5
Burning Brakes
Re: Sidepipes and Angle plug heads (Nomad78SA)
I have GM Heads 882's with angle plugs and like most guy's that will answer you will tell you only one or two plugs will be a little harder to get out. Also as mentioned above it will depend on what head you have. I was going to advise Hooker that they should remove that disclaimer as it' is not real accurate. Here you can see the first plug is a little tough.
03-22-2002, 11:03 AM
#6
Drifting
Member Since: Sep 1999
Location: Wylie TX
Posts: 1,411
Likes: 0
Received 0 Likes
on
0 Posts
Re: Sidepipes and Angle plug heads (72rdstr)
I've got the Hooker sidepipe headers with AFR L98 angle plug heads and they fit without any real problems. Like most, the #2 boot is pretty close, but it is not a problem.
