Chassis Painting
Thread Starter
Safety Car
Joined: Mar 2009
Posts: 3,558
Likes: 4
From: Oakland California
. I'm going to have to save that pic as a reference
. Anybody else have any pics of the painted underside of their Vette? I hope to finish cleaning the chassis next week and ready for paint.
Thread Starter
Safety Car
Joined: Mar 2009
Posts: 3,558
Likes: 4
From: Oakland California
Finally found the cord. It really looks better in person. Here are some of the pics:
I still have to remove some other things to be able to get more of the chassis cleaned up, but here's what I've done so far. I'll continue next week.
I didn't want to take off the wheel, so I just took a quick pick of the rear.
Here's one while I was removing the control arms.
Just a pic of one of the lower control arms cleaned up. I still have to remove the bushings and ball joint.
I still have to remove some other things to be able to get more of the chassis cleaned up, but here's what I've done so far. I'll continue next week.
I didn't want to take off the wheel, so I just took a quick pick of the rear.
Here's one while I was removing the control arms.
Just a pic of one of the lower control arms cleaned up. I still have to remove the bushings and ball joint.
Thread Starter
Safety Car
Joined: Mar 2009
Posts: 3,558
Likes: 4
From: Oakland California
I had to figure out what these wire where for. These are some of them. Before.
Here's one of the wiring harness. I had to figure this puzzle out. After.
These wires where for the AC and the T.C.S
Here's one of the wiring harness. I had to figure this puzzle out. After.
These wires where for the AC and the T.C.S
Last edited by jordan89; Aug 7, 2010 at 11:19 PM.
Thread Starter
Safety Car
Joined: Mar 2009
Posts: 3,558
Likes: 4
From: Oakland California
I still have a lot more to do. I want to get as much done as possible next week. I'm going to do the engine compartment once it's at my friends shop. I still have to remove the rest of the front suspension and steering system. I also have to go buy more paint for the cast iron parts and other things.
Drifting
Joined: Jul 2006
Posts: 1,871
Likes: 6
From: Sault Ste. Marie Ontario
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
