I believe its Bairs that is rebuilding old cores with a better than factory hardened end.
Side Yoke availability
Thread Starter
Racer
Joined: Jan 2007
Posts: 427
Likes: 1
Thanks for the info. I did find his site and note they are rebuilt which is alright. I was wanting new with complete u-bolts and clip as a unit.
I was very pleased to see he carries a pinion screw that I was in search of a few posts back. I will get hold of him for that.
Thanks again for the tip.
I was very pleased to see he carries a pinion screw that I was in search of a few posts back. I will get hold of him for that.
Thanks again for the tip.
Le Mans Master
Joined: Dec 2003
Posts: 5,727
Likes: 38
From: Fremont CA
I think Tom at International Axel still makes his stuff in the USA. The yokes from Lonestar make me want to PUKE! I don't like Chinese stuff. Link to Intl Axel: http://www.internationalaxle.com/pro...m#Differential Parts
Drifting
Joined: Apr 2002
Posts: 1,720
Likes: 19
From: Manhattan Beach Ca
Lots of cheap China crap floating around. I had new ones installed and they sheared in half after a couple hundred miles. Cost me an injury that took 6 months to heal.
I would never get rebuilt ones and recommend always get heavy duty hardened ones if possible. MY .02
I would never get rebuilt ones and recommend always get heavy duty hardened ones if possible. MY .02
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Drifting
Joined: Jul 2002
Posts: 1,995
Likes: 110
From: Garland Texas
The company that was making the GM Restoration yokes is gone. The man behind them isn't. GM was his largest customer until the government got involved and pulled the plug. He is setting up a new factory and new yokes will be available in about 3 months.
Mike
Mike
Melting Slicks
Joined: Apr 2006
Posts: 2,084
Likes: 14
From: Airdrie Alberta
Race Director
Joined: Sep 1999
Posts: 11,361
Likes: 383
From: Plano TX
Could also check Duntov
http://www.duntovmotors.com/differentials-63-79.php
http://www.duntovmotors.com/differentials-63-79.php
