Door Issue
#1
Heel & Toe
Thread Starter
Member Since: Dec 2011
Location: anywhere FL
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Door Issue
I have a 1968 with a very rusted frame. The passenger door will not open. The latch is working, I have jacked it up to relieve the stress on the door and it still won't open. Without wrecking the door or quarter, any ideas?
#2
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi l,
You say the latch is working... what about the lock ****? Is the **** actually pushing the rod that unlocks the latch when you turn it?
Merry Christmas!
Regards,
Alan
You say the latch is working... what about the lock ****? Is the **** actually pushing the rod that unlocks the latch when you turn it?
Merry Christmas!
Regards,
Alan
#3
Heel & Toe
Thread Starter
Member Since: Dec 2011
Location: anywhere FL
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
door
Alan, I can see the latch working. When I turn the **** it don't move. I am guessing that with it trying to fold up, there is a bind in it. Thanks! Tim
#4
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi Tim,
Is the interior door panel in place?
Regards,
Alan
Is the interior door panel in place?
Regards,
Alan
#6
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi l,
I think then your best hope is to flood the latch mechanism with wd40 and try to get the lock **** working.
You MIGHT be able to reach down along the inside of the glass (long thin tool like a hacksaw blade) and push on the lever that the rod from the lock **** attaches to in order to unlock the latch.
Regards,
Alan
I think then your best hope is to flood the latch mechanism with wd40 and try to get the lock **** working.
You MIGHT be able to reach down along the inside of the glass (long thin tool like a hacksaw blade) and push on the lever that the rod from the lock **** attaches to in order to unlock the latch.
Regards,
Alan
#8
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi L,
HOW????
Regards,
Alan
HOW????
Regards,
Alan
#9
Heel & Toe
Thread Starter
Member Since: Dec 2011
Location: anywhere FL
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
68 door
I looked at a spare I had and seen how far it has to go to open, I pulled the inside latch handle as far as it would go and put a large screwdriver on the latch inside the door and pushed a bit further and it clicked open.