What engine do i have exactly
#1
Navigator
Thread Starter
Member Since: Dec 2011
Location: Traver Ontario
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
What engine do i have exactly
I just have some questions i want to know exactly what im dealinw with.Its a crate motor and the casting number on the back of the block is 14015445 and the date code is J148 i belive
#2
Melting Slicks
Block number reads as a 454 ci big block manufactured from 1978-1990, 2 or 4 bolt main. (See link below)
http://www.castingnumbers.info/site/.../Engine_Blocks
Date code of J148 would indicate a block cast October (J) 14th of 1978 or 1988.
First position is a letter month designation: A-Jan, B-Feb, C-Mar, D-Apr, E-May, F-Jun, G-Jul, H-Aug, I-Sep, J-Oct, K-Nov, L-Dec.
Month is followed by a digit or digits representing the date of the month ("1" thru "31").
Date is followed by a single digit representing the year. Given the casting history of the 14015445 block that could be 1978 or 1988.
Last edited by mapman; 01-01-2012 at 12:44 PM.
#3
Navigator
Thread Starter
Member Since: Dec 2011
Location: Traver Ontario
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks alot for your help. im just looking around to find info on it so i know what i have for doing some mods to it. do you know where to look for the tranny number so i can figure out what i have for that too. it runs on race fuel and i want to put a blower on it but i guess i have to change the pistons to lower the compression on it do you know where i can get a book for this engine?
#4
Melting Slicks
ok thanks alot for your help. im just looking around to find info on it so i know what i have for doing some mods to it. do you know where to look for the tranny number so i can figure out what i have for that too. it runs on race fuel and i want to put a blower on it but i guess i have to change the pistons to lower the compression on it do you know where i can get a book for this engine?
Auto?, Turbo Hydramatic 400/350/700R4? , 3-speed?, Muncie 4-speed, Warner 4-speed?
LOL: I'm just trying to get my regular Corvette to run - not ANY help on race engines, sorry.
#5
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi mm,
Your "regular Corvette"!!!!???? ALL Corvettes are SPECIAL!!!!!
Happy New Year!
Regards,
Alan
Your "regular Corvette"!!!!???? ALL Corvettes are SPECIAL!!!!!
Happy New Year!
Regards,
Alan
#6
Melting Slicks
#7
Navigator
Thread Starter
Member Since: Dec 2011
Location: Traver Ontario
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the advice again i was looking and found some paperwork for the engine its an 88 454 LS7 and the tranny is a munsie M21 4speed. it was my father inlaws car he passed away about 13 years ago and he used to drag race it i personaly haven't had the oppertunityto take it out to the track. but from what i have done on the road it hauls