Fuse panel
Thread Starter
Advanced
Joined: Dec 2011
Posts: 66
Likes: 0
From: apollo beach fl
Fuse panel
Anybody have a pic of the panel for a 1975 vette.
pluse when i put a volt light on a fuse some only light when i touch one side,and some light when each side of the fuse is touch,my tail light,brake light,turn singles are out
thank
s
pluse when i put a volt light on a fuse some only light when i touch one side,and some light when each side of the fuse is touch,my tail light,brake light,turn singles are out
thank
s
Le Mans Master
Joined: Aug 2006
Posts: 7,426
Likes: 1,559
From: mount holly NC
2025 c3 ('74-'82) of the Year Finalist - Unmodified
2019 C3 of Year Finalist (appearance mods)
Here's a typical fuse box-yours may or may not be the same.
Remove each fuse and check that it's good and reinstall or replace.
After the fuse is reinstalled make sure that you have power on both ends of the clips.
You will have to turn the key on to power up some fuses.
See if that helps and post back.
Remove each fuse and check that it's good and reinstall or replace.
After the fuse is reinstalled make sure that you have power on both ends of the clips.
You will have to turn the key on to power up some fuses.
See if that helps and post back.
Thread Starter
Advanced
Joined: Dec 2011
Posts: 66
Likes: 0
From: apollo beach fl
Fuse
Here's a typical fuse box-yours may or may not be the same.
Remove each fuse and check that it's good and reinstall or replace.
After the fuse is reinstalled make sure that you have power on both ends of the clips.
You will have to turn the key on to power up some fuses.
See if that helps and post back.
Remove each fuse and check that it's good and reinstall or replace.
After the fuse is reinstalled make sure that you have power on both ends of the clips.
You will have to turn the key on to power up some fuses.
See if that helps and post back.
