windshield frame sealant
Thread Starter
Safety Car
Joined: Feb 2012
Posts: 4,705
Likes: 983
From: Orlando FL
windshield frame sealant
We took everything off the windshield frame to weld in new corners, and patch some small holes. In the channel, along the top of the frame (under the T-top header trim) was a thick, black, tar like sealer. Can anybody tell me what, or where to find something to put back in there when we re-assemble it?
Racer
Joined: Nov 2004
Posts: 485
Likes: 1
From: Oakville ON
not that you asked ....
If you had holes in the top of the birdcage, carefully inspect the area below the base of the windshield area, under the FG 'wings'. There is often perforation rust there too and it is hard to see and hard to fix since access is almost impossible w/o removing the FG.
Thread Starter
Safety Car
Joined: Feb 2012
Posts: 4,705
Likes: 983
From: Orlando FL
Thanks for the info! We did find some more holes down below, but only on the driver side, and some in the driver door bottom as well.
(And here I thought we were done with the welder!)
(And here I thought we were done with the welder!)
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,851
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
