Wrong Headers on SRIII?
Thread Starter
Burning Brakes
Joined: Oct 2010
Posts: 1,160
Likes: 23
From: Prescott AZ
Wrong Headers on SRIII?
Just took the headers and side pipes off of my stock 1970 coupe and tried to install them on my SRIII chassis (set up for side pipes). The headers and pipes are the stainless steel ones I bought from Josh a couple years ago on the forum and fit great on my stock frame. The passenger side fit, touches the frame in a couple spots on the SRIII but went on. The driver side there is no way it will go on. The second tube of the header hits squarely where the brace from the front of the frame goes to the back. I do notice that the routing of the headers tubes is different from the passenger side to the driver side. I have seen others that have the SRIII chassis with side pipes and no fitment issue. Does anyone know what brand pipes I need to get?
Thread Starter
Burning Brakes
Joined: Oct 2010
Posts: 1,160
Likes: 23
From: Prescott AZ
Wish someone would chime in about what brand headers/side pipes they used. I have see pics so I know others have done it but don't know what brand they were using. Any help would be greatly appreciated.
