When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Have 68 coupe I am reworking. Dash is out with wiring exposed. question is regarding dash lights. Did not work when I got the car and put new headlight switch in. When I connect headlight switch and connect battery,I get headlights,tail lights and marker light. No dash lights at all. Fuses are good. Do I need to have dash back in place with bulbs plugged in for ground? If so great. what else should I look for before I put it all back together? Thanks for any tips you can give me- not an electrical genius!!!! Paul
Have 68 coupe I am reworking. Dash is out with wiring exposed. question is regarding dash lights. Did not work when I got the car and put new headlight switch in. When I connect headlight switch and connect battery,I get headlights,tail lights and marker light. No dash lights at all. Fuses are good. Do I need to have dash back in place with bulbs plugged in for ground? If so great. what else should I look for before I put it all back together? Thanks for any tips you can give me- not an electrical genius!!!! Paul
The bulb needs a ground... so to test them, jump a ground wire from the A pillar and touch it to he fingers that hold the bulb in place.
Thanks makes sense. I was concerned as lights didn't work before I took dash apart and hope that a bad headlight switch was the problem.. Thanks for the help neighbor-- live near Versailles in Milan Paul
Thanks makes sense. I was concerned as lights didn't work before I took dash apart and hope that a bad headlight switch was the problem.. Thanks for the help neighbor-- live near Versailles in Milan Paul
Well just hook up one ground, then just pass it over each lamp.. only takes a minute or two... You get stuck on putting the dash back in let me know too.
I hope you have the column out.. if not before you go back you might want to remove it. Your only 7 bolts from having it out.. and with it out you will keep from damaging your lower dash pad. There are instructions on the site on how to remove a dash pad the easy way.. http://willcoxcorvette.com/repairand...lp.php?hID=318 click on supporting document.
Milan.. The real Hickory High...
I know exactly where you are.. lets see.. Bobby Plumb, 1954... I'm a basketball junkie... lol. North of Aurora. You should come down sometime...
Have met Bobby many times plus other players.My son is the AD there and my wife just retired as the treasurer at Milan.. have a copy of the original 54 game.. Nice memories for locals- I'm from the East coast myself . Have friend Scott Higgs in your neighborhood. Thanks for the help-- column is out!!!