Tachometer replacement
Thread Starter
5th Gear
Joined: Nov 2013
Posts: 5
Likes: 0
From: Falcon Colorado
Tachometer replacement
Thought I'd ask someone who hopefully has done this before. I'm rebuilding my 81 vette and trying to fix the tachometer. Bought a new circuit board and when I went to install it , I can not see how the three plug in connectors line up with the circuit board . Could there be possible snap in connector's that I'm missing ? The three screw posts can' t possibly line up . Help ?
Former Vendor
Joined: Aug 2006
Posts: 76,656
Likes: 1,850
From: Jeffersonville Indiana 812-288-7103
St. Jude Donor '08-'09-'10-'11-'12-'13-'14-'15
The three studs that are screwed on the tach board should fit in these three clips in the housing.
If you look at the board below you can see the correct orientation of the three studs.
Willcox
If you look at the board below you can see the correct orientation of the three studs.
Willcox
