'68 Factory A/C Questions
Thread Starter
Melting Slicks
Joined: Nov 2001
Posts: 2,793
Likes: 58
From: God's Country The Old Dominion
'68 Factory A/C Questions
I thought my car was a factory A/C car however after re-reading the engine suffix (HT) I realize it was not. The car does have what appears to be a factory A/C setup as shown in the pictures. I purchased the A/C harness with he new wiring harness and found that the connectors would not fit through the hole in the firewall. The assembly manual shows the hole as 1.62" however it is only 1". Where the holes in the firewall different from A/C to non A/C cars? The manual does not say. I was going to have the non working A/C repaired however since it is not working or original should I just go aftermarket?
Last edited by Too Slow '90; Jul 5, 2014 at 04:13 PM.
Thread Starter
Melting Slicks
Joined: Nov 2001
Posts: 2,793
Likes: 58
From: God's Country The Old Dominion
