When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When you bench test exactly as shown in the video, and when you ground the green with the blue wire ground removed, it won't park. Is this correct?
I also thought you said, you powered up the brown wire to get the motor to run..
Willcox
Ok after a lot of testing what I found first the brown and white wire that goes to the override switch had been cut .Next when you remove grounds it will keep running because the little park arm will not depress far enough to break the contact points when the power is cut off to the yellow wire so motor cant park in proper place .After three days I now with your and forum members have a very good grasp of how this system works .I now can be locked up in the same mental institution as the guy that designed this !@#$%^&.
Wes