Need headers help- angle plug heads
Safety Car
Joined: Jan 2009
Posts: 3,736
Likes: 56
From: anchorage ak
Drifting
Joined: Aug 2015
Posts: 1,939
Likes: 477
From: NSW, Australia
C3 of Year Finalist (track prepared) 2019
The Summit brand headers fit. I had the same issue. Have a look at this thread:
https://www.corvetteforum.com/forums...gle-plugs.html
https://www.corvetteforum.com/forums...gle-plugs.html
Melting Slicks
Joined: May 2006
Posts: 2,369
Likes: 103
From: Centerville Louisiana
I called they recommended Flowtech $316 Ceramic. I did have to call a couple of times to talk to someone who actually knew what they were talking about. I was looking at the Summit brand but they weren't sure.
Thread Starter
Advanced
Joined: Oct 2014
Posts: 73
Likes: 5
From: AR
The Summit brand headers fit. I had the same issue. Have a look at this thread:
https://www.corvetteforum.com/forums...gle-plugs.html
https://www.corvetteforum.com/forums...gle-plugs.html
Race Director
Joined: Dec 2004
Posts: 10,332
Likes: 63
From: PARADISE
St. Jude Donor '09-'11-'12-'13-'14
Most of the headers available have lousy ceramic coating that doesn't last. You are better off buying bare steel headers and having them done by another coater. Calico Coatings and Caps Brite Hot Coatings are two that come highly recommended.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Drifting
Joined: Aug 2015
Posts: 1,939
Likes: 477
From: NSW, Australia
C3 of Year Finalist (track prepared) 2019
Safety Car
Joined: Jan 2009
Posts: 3,736
Likes: 56
From: anchorage ak
Melting Slicks
Joined: Mar 2008
Posts: 2,666
Likes: 289
From: Spring Park MN
My Brodix -10 heads have angled plugs and raised exhaust ports that further complicate clearance for the plugs. I run Hooker Super Comp headers. It requires shorty plugs and I had to clearance the #6 header tube for the plug. Measured carefully and then took a round 3/4" steel bar rapped in a rag and laid in on the tube at the proper spot and angle and hit it with a large hammer. It made a nice indent and looked like it was made that way. It gave me the clearance I needed. It didn't even crack or mark the ceramic coating.
Last edited by v2racing; Jul 22, 2016 at 04:31 PM.
