69 Tail Light Hsg Interior Finish
#1
Racer
Thread Starter
69 Tail Light Hsg Interior Finish
This is what I found when I removed my driver's side tail light lenses.
Appears that someone coated the interior with a thick gray paint. It's certainly not reflective. Question: What's the OEM finish?
Appears that someone coated the interior with a thick gray paint. It's certainly not reflective. Question: What's the OEM finish?
#2
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi,
The housings originally had a thickish bright white paint in them.
I touched up using 'appliance white'.
Regards,
Alan
The housings originally had a thickish bright white paint in them.
I touched up using 'appliance white'.
Regards,
Alan
Last edited by Alan 71; 08-03-2016 at 02:30 PM.
#3
Team Owner
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,469 Likes
on
1,248 Posts
Cruise-In II Veteran
#4
Safety Car
use paint stripper, or media blast to remove the caked on old paint, then repaint.
a smooth surface will be much more reflective of the light.
a smooth surface will be much more reflective of the light.
#5
Racer
Thread Starter
Thanks, guys. Looks like I've got another little project - another de-bubba project! Let's not be too hard on the old boy, in many cases he means well