Installing headline assembly-1972
#1
Installing headline assembly-1972
Easiest way to reinstall entire headlite assembly? Drop it in through the opening on the top side? Drop it in from engine bay? Lift it in from below? Thx, Bob
#2
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi Bob,
Are you considering the headlight door and mechanism AND the 'frame' that all is attached to the 'assembly'?
Or is the 'frame' still mounted in place?
I think it's quite chancy trying the assembly and frame from the top.
I think it's wiser to install the frame and then assemble the door, actuator, and mechanism in place.
Regards,
Alan
This is the frame (black) and the headlamp door and the operating assembly.
Are you considering the headlight door and mechanism AND the 'frame' that all is attached to the 'assembly'?
Or is the 'frame' still mounted in place?
I think it's quite chancy trying the assembly and frame from the top.
I think it's wiser to install the frame and then assemble the door, actuator, and mechanism in place.
Regards,
Alan
This is the frame (black) and the headlamp door and the operating assembly.
Last edited by Alan 71; 03-17-2018 at 12:16 PM.