Battery gauge not working
01-16-2019, 09:41 AM
#1
Racer
Thread Starter
Battery gauge not working
IveI been looking to buy an 80 to 82 Vette and in almost every one the battery/alternator gauge is broken. Is the problem usually with the gauge, wiring or the sender. Please advise if you can
01-16-2019, 10:58 AM
#2
01-16-2019, 11:19 AM
#3
Racer
Thread Starter
So you have to replace the whole board?
01-16-2019, 11:39 AM
#4
You can repair them sometimes when not too far gone.
https://www.zip-corvette.com/77-82-c...yABEgJBkvD_BwE
Voltmeters rarely fail. It's this board and the plug that goes into it falls apart after years. There is no sender per say.
https://www.zip-corvette.com/77-82-c...yABEgJBkvD_BwE
Voltmeters rarely fail. It's this board and the plug that goes into it falls apart after years. There is no sender per say.
01-16-2019, 12:02 PM
#5
Racer
Thread Starter
Thank you very much appreciated