69 - Centrifugal Super Charger build (Vortech)
#22
Burning Brakes
Thread Starter
Well I finally got it all piped together for now. I figured out how to run the twin intercoolers and I have them mounted but I have to hold off. Reason is I will need an L88 or cowl hood and I also need to adjust how far the hood can open as it hits the pipes at full tilt.
Last edited by nyciti; 09-08-2019 at 08:57 AM.
The following users liked this post:
ajrothm (09-08-2019)
#23
Burning Brakes
Thread Starter
So couple of updates....pulled it out the garage after a year of building the car (it's dirty I know). Took it for a road test down the road and all went well! Obviously I need to tune it and a few other little things but success!!
The following 3 users liked this post by nyciti:
#25
C3. 427, 4-link, c7 z06
Very nice! How much boost are you running? You could just build a 'bulge' into your hood for the blower rather than buy a new hood. My guess is that any new hood you get will have the same clearance problem in that area and you will need to repaint it regardless.
#27
Burning Brakes
Thread Starter
#28
Burning Brakes
Thread Starter
No boost numbers yet but the pulley I have on it now is for 10psi. I also didn't mount the intercoolers yet, still working out if I want to run my twin Air2Air or go with a water cooled one (leaning towards the water cooled). At this point I just wanted to get the car on the road, I want to stay away from modding for ever and never actually getting it "done".
I'll be sure post it once its in (thats for the winter)
I'll be sure post it once its in (thats for the winter)
#30
Burning Brakes
Thread Starter
Well after a year I was able to take it down the street for a quick run...car is just silly (in a very good way). Still have to tune it so its only going to get much better. Also gave it a bath... hopefully interior will be done soon, I'll put the my wheels on it and I can start to enjoy before the snow comes
.
.
Last edited by nyciti; 10-13-2019 at 04:25 PM.
#31
Le Mans Master
Member Since: May 2003
Location: Fernandina Beach FL
Posts: 8,481
Received 3,220 Likes
on
1,732 Posts
2023 Restomod of the Year finalist
2020 C3 of the Year Winner - Modified
Hey Angelo-
What no video? We want a video!!!
Really nice work- I like the out of the box solutions you have done.
Richard
What no video? We want a video!!!
Really nice work- I like the out of the box solutions you have done.
Richard
#32
Burning Brakes
Thread Starter
#35
Burning Brakes
Thread Starter
Sure headers are Doug's. They fell into the car but I have nothing stock. If you are using a R&P setup then number 1 tube will need some love. The inserts are the middle sound ones and the heat shields are from cobrastuff. Everything is ceramic coated.
#38
Le Mans Master
Member Since: May 2003
Location: Fernandina Beach FL
Posts: 8,481
Received 3,220 Likes
on
1,732 Posts
2023 Restomod of the Year finalist
2020 C3 of the Year Winner - Modified
Really??? Your not going to show the seats? Tell us who did the stitching? Inquiring minds what to know!!!
BTW I'm going with the red stitching as well.
Coming along nicely!!!
Richard
BTW I'm going with the red stitching as well.
Coming along nicely!!!
Richard
The following users liked this post:
Rescue Rogers (12-29-2019)
#40
Burning Brakes
Thread Starter
Almost there.....still have to obviously clean up and work out some small fitment issues and put the doors back on...but almost done...
Last edited by nyciti; 01-05-2020 at 07:35 PM.
The following 2 users liked this post by nyciti:
Metalhead140 (01-05-2020),
Rescue Rogers (12-29-2019)