Console dash pad alignment issue.
Thread Starter
Racer
Joined: Apr 2004
Posts: 292
Likes: 41
From: Falls Church VA
Console dash pad alignment issue.
Anyone ever have this problem? Other side of console fits fine. Passenger dash pad fits fine at the top. Could this simply be a defective dash pad?
Last edited by Silver72; Jun 11, 2019 at 05:40 PM.
Thread Starter
Racer
Joined: Apr 2004
Posts: 292
Likes: 41
From: Falls Church VA
Team Owner
Joined: Jan 2006
Posts: 37,637
Likes: 3,118
From: Crossville TN
I'm thinking that the trans console is too far forward. Did you install sound-proofing and heat shielding material behind the trans console?
Last edited by 7T1vette; Jun 11, 2019 at 06:30 PM.
Drifting
Joined: Nov 2013
Posts: 1,806
Likes: 258
From: Dublin Ohio
Ive had my center gauge cluster in and out 4-5 times in the past couple years. I would take that passenger dash back out, take out the parking brake console, remove the gauge cluster to dash screws, remove the screws in the shift console support brace, loosen up radio nuts/brace and see if I could pull the forward shift console back.
Thats what I would do.
More pictures might help.
Thats what I would do.
More pictures might help.
