When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is there a way to adjust the resting position of the bucket (down position)? I want to raise the front edge a little if possible without causing other fitment issues.
The down adjustment stop is a long threaded rod with a hex on the end, frequently this is frozen into the cast (white-metal/aluminum) bracket so be careful
More or less, that bottom image was taken looking up through the large hole in the bottom of the front end
Seriously, be careful when trying to get that rod to turn
M
Question: C3 Headlight Bucket Adjustment?
