When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Running the return line for the FiTech fuel injection. So thought I would post a few pickies of progress so far. The fuel pump seen in one of the pictures is the low pressure fuel pump used for the carb. I will be keeping it since I am using the Force Fuel system. Return line adapter next to filler neck. Low pressure pump and in line pre filter. Return line in rubber in front of the tank. Pressure and return lines follow a common route. Pressure and return line nicely tucked out of harms way. I might install a stone deflector.
EFI Conversion Return Pipe.
