Keith Black Pistons
Thread Starter
Racer
Joined: Sep 2001
Posts: 369
Likes: 0
From: Millington TN
Keith Black Pistons
I'm getting close to assemblying my killer 383. I still need to pick up a few items, of which a set of KB's is one of them. I know I can get a set for around $250 from Summit and JEG.
Does anybody know where I can get a set cheaper than that?
I'm looking for PN KB-135(i think it's the 135's)
it's the 18cc dish piston with the 5/64 rings and the 1.46 hieghth.
Love to hear from anybody on this.
Does anybody know where I can get a set cheaper than that?
I'm looking for PN KB-135(i think it's the 135's)
it's the 18cc dish piston with the 5/64 rings and the 1.46 hieghth.
Love to hear from anybody on this.
Thread Starter
Racer
Joined: Sep 2001
Posts: 369
Likes: 0
From: Millington TN
Re: Keith Black Pistons (Teuffelhunde)
Yeah, i know. I have found lot's of good deals, however, i have yet to find a set though.
I got set of sportsmanII heads, bare, never used, $230 for the pair and a set of 1.5 crane cams roller rockers for 80.
No pistons though.
I got set of sportsmanII heads, bare, never used, $230 for the pair and a set of 1.5 crane cams roller rockers for 80.
No pistons though.
Race Director
Joined: Apr 2000
Posts: 17,676
Likes: 201
From: Who says "Nothing is impossible" ? I've been doing nothing for years.
Re: Keith Black Pistons (honaker)
I can't help you but are you going with the dish piston to keep the CR ratio at around 10:1 with the iron heads ? I know KB flat tops are about 11:1 with the stroker kits and 64cc heads.
Racer
Joined: Feb 2002
Posts: 272
Likes: 1
From: MOBILE ALA
Re: Keith Black Pistons (honaker)
Got a set I`m not using.Kb 18cc for 5.7 rod,3.75 stroke,30 over.These have the 1/16 top ring.I ran them for a few miles[2000] when I first built my 383.I changed to the 12cc to get 10.3.If you can use them just pay for the shipping and they are yours. :chevy
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
