TKO 600 nuetral switch
Thread Starter
Racer
Joined: Nov 2020
Posts: 265
Likes: 76
TKO 600 nuetral switch
I'm finishing up conversion and I'm using the nuetral switch on the TKO. I know it's only cutting power to the starter soleniod but the wires that were on the old auto shifter plug are like 14 gauge. Does anyone know if the TKO nuetral switch will handle the current to the solenoid or do I have to install a relay?
TIA
TIA
Race Director
Joined: Jan 2000
Posts: 12,399
Likes: 247
From: San Jose CA
You’ll burn up the switch in the transmission very quickly. Use it as a signal to your relay system.
I re-used the factory neutral safety wiring and put a relay by the shifter under the console.
I re-used the factory neutral safety wiring and put a relay by the shifter under the console.
