No power
Thread Starter
Advanced
Joined: Oct 2019
Posts: 97
Likes: 10
No power
Guys. I have a 69 coupe with no power from ignition to start engine. No accessories either. When I jump two wires inside the wiring harness (purple and black), I get it to crank. I can't figure this out and it's frustrating. Checked all fuses and continuity. Power to engine side at horn relay. Jumped it to distributor.
Is my vette stock?? HAHA
Joined: Oct 2015
Posts: 20,259
Likes: 9,396
From: Im not allowed to tell you
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
I had my fuse block rot out on the fire wall side so I couldnt see it. Check continuity on all the wires. Check your connection at the ignition switch and then check your switch is adjusted correctly on the column. THey can loosen up and the rod will push the switch assembly away so it doesnt actually make any connections. If you are going to spend some time under her you may want to pull the drivers seat
