posi tuned
05-02-2024, 09:34 PM
#1
Tech Contributor
Thread Starter
posi tuned
Content removed
Last edited by GTR1999; 05-10-2024 at 04:35 PM.
The following users liked this post:
427Hotrod (05-06-2024)
05-02-2024, 11:13 PM
#2
Old Pro Solo Guy
OK I'll play...
12 bolt spiders?
12 bolt spiders?
05-03-2024, 12:00 AM
#3
Tech Contributor
Thread Starter
Yes indeed, 12 bolt - 30 spline, NOS Eaton Net Forged spiders, will be used with Tom's 1350 axles, hardened and cryo treated.
The new spiders and fiber clutches were removed. Solid steels with the 12 b spiders will be used.
Case milled, double bored, cross shaft holes bored for 10 x12 shaft. Case, spiders, cross shaft, and bolt cryo treated.
Run in 700 - 800 revs
Unlike most new cases, this one was not as tight with the sides. .
The new spiders and fiber clutches were removed. Solid steels with the 12 b spiders will be used.
Case milled, double bored, cross shaft holes bored for 10 x12 shaft. Case, spiders, cross shaft, and bolt cryo treated.
Run in 700 - 800 revs
Unlike most new cases, this one was not as tight with the sides. .
05-03-2024, 02:43 PM
#4
Tech Contributor
Thread Starter
content removed
Last edited by GTR1999; 05-10-2024 at 04:35 PM.
The following 3 users liked this post by GTR1999:
05-03-2024, 06:38 PM
#5
Old Pro Solo Guy
Now that should be one strong posi!
The following users liked this post:
GTR1999 (05-06-2024)
The following users liked this post:
GTR1999 (05-06-2024)
05-04-2024, 04:22 AM
#7
Le Mans Master
Member Since: Nov 2006
Location: Sunshine Coast, Queensland, Australia
Posts: 8,921
Received 4,795 Likes
on
2,887 Posts
2022 C3 of the Year Finalist - Modified
Cruise-In VIII Veteran
What's really bad about this car **** is even if you lust for it, you can't have it at any price. These parts are now made of unobtainium.
Sure is pretty thou!
Sure is pretty thou!
05-05-2024, 08:45 PM
#9
Le Mans Master
05-06-2024, 09:29 AM
#10
Tech Contributor
Thread Starter
There are a lot. I participate in a couple on FB and the tech board on NCRS, but there are many. Some are good and some are not. Some have helpful people but also have some arrogant jerks. So, no I don't really recommend forums or vendors for that matter.
