Free Engine anyone?
Thread Starter
Safety Car
Joined: Sep 2000
Posts: 4,679
Likes: 6
From: Charles Town WV
Free Engine anyone?
I'm moving and I need to get this 350 out of my garage. First come first serve. It's in Herndon VA.
WHat you get: A long block with an oil pan (basically the whole engine sans manifolds).
It's a 2 bolt main block, .40 over and needs a rebuild. It has 882 heads on it. It comes on an engine storage stand. If noone claims it, I'm going to dig a big hole and bury it, as I'm not moving this heavy thing with me. If you come to pick it up, please bring a cherry picker.
Over and out.
WHat you get: A long block with an oil pan (basically the whole engine sans manifolds).
It's a 2 bolt main block, .40 over and needs a rebuild. It has 882 heads on it. It comes on an engine storage stand. If noone claims it, I'm going to dig a big hole and bury it, as I'm not moving this heavy thing with me. If you come to pick it up, please bring a cherry picker.
Over and out.
Le Mans Master
Joined: Apr 2003
Posts: 7,154
Likes: 1
From: I blame my Dyslexia MD
Re: Free Engine anyone? (Steve Straus)
I live near Annapolis Maryland and would be interested in it. Is it carb to oil pan? I have a truck at my disposible, but i dont have a cherry picker, although I may be able to borrow one. Also could you give me more info on the heads and where the block came from. Also what would a rough estimate on power be. Thank you.
MAtt
No promises but I am severly interested, its just I head to WVU friday, and Carlisle from there.
MAtt
No promises but I am severly interested, its just I head to WVU friday, and Carlisle from there.
Thread Starter
Safety Car
Joined: Sep 2000
Posts: 4,679
Likes: 6
From: Charles Town WV
Re: Free Engine anyone? (pillowmeto)
I live near Annapolis Maryland and would be interested in it. Is it carb to oil pan? I have a truck at my disposible, but i dont have a cherry picker, although I may be able to borrow one. Also could you give me more info on the heads and where the block came from. Also what would a rough estimate on power be. Thank you.
.
.
In any case, it's free.
Burning Brakes
Joined: Mar 2002
Posts: 1,102
Likes: 0
From: Montreal QC
Re: Free Engine anyone? (Steve Straus)
Dang, if you wouldn't live that far from me I would already be there... :smash: That small wet part between us makes my trip a bit hard... :crazy: It would be the same as moving for you to send it to Finland... I might be willing to pay the transportation, but that is still some job for you...
I can't believe that nobody want's a free engine. In here, write to some discussion board that you have an engine which run last time ten years ago and has been sitting outside since then and first to come gets it for free, just wait ten minutes and your parking place is more crowded than the growsery store parking lot in busy hours... :crazy: :crazy: :crazy: :seeya
I can't believe that nobody want's a free engine. In here, write to some discussion board that you have an engine which run last time ten years ago and has been sitting outside since then and first to come gets it for free, just wait ten minutes and your parking place is more crowded than the growsery store parking lot in busy hours... :crazy: :crazy: :crazy: :seeya
Le Mans Master
Joined: Apr 2003
Posts: 7,154
Likes: 1
From: I blame my Dyslexia MD
Re: Free Engine anyone? (Steve Straus)
Im only around wendsday and thursday. So wendsday is probobly to short notice, but would it be ok if thursday a friend and I came with a pick up truck and took it off your hands. We dont have a cherry picker though, maybe if I just unbolted the heads and loaded the three peices in the bed of the truck and tied them down that would work, we are pretty stong, and probobly capable of lifting that block, or rolling it on with a ramp.
If you would like to call me i can be reached at 4108673569 I feel confident putting my number out in this forum
Thankyou
MAtt
[Modified by pillowmeto, 11:27 PM 8/12/2003]
If you would like to call me i can be reached at 4108673569 I feel confident putting my number out in this forum
Thankyou
MAtt
[Modified by pillowmeto, 11:27 PM 8/12/2003]
