Getting real close to knocking this project out!
Thread Starter
Platinum Supporting Dealership
Joined: Dec 1999
Posts: 6,425
Likes: 1
From: Traveling the US
Getting real close to knocking this project out!
...of the garage at least!!
http://vettefinders.com/index.cfm?fuseaction=79part23
We hope to get the body back on in the next couple weeks.
http://vettefinders.com/index.cfm?fuseaction=79part23
We hope to get the body back on in the next couple weeks.
Safety Car
Joined: Jun 2002
Posts: 4,844
Likes: 0
From: Pearland TX
St. Jude Contributor
Re: Getting real close to knocking this project out! (Chris@VetteFinders)
Chris,
It's gotta be alot of fun working on these C-3's with the body off and nothing keeping you from doing things right. Then again... I guess it gets more costly as you don't want to put the body back on until everything is just the way you want it. If you have gone this far why not take a little extra time and money and never question what you did.
Kudos on the work! :cheers:
It's gotta be alot of fun working on these C-3's with the body off and nothing keeping you from doing things right. Then again... I guess it gets more costly as you don't want to put the body back on until everything is just the way you want it. If you have gone this far why not take a little extra time and money and never question what you did.
Kudos on the work! :cheers:
Melting Slicks
Joined: Jan 2003
Posts: 2,804
Likes: 1
From: OKC Oklahoma
Re: Getting real close to knocking this project out! (Chris@VetteFinders)
You guys are doing a great job. My frame is cracked in the same place. I bought a tower brace from Van Steel to hopefully keep this from happening again after I get it welded. I have the engine and suspension off right now. Anyway, are those the Dynomax headers? That engine looks really nice. The upgrades should add some punch. Full speed ahead!! :chevy :thumbs:
