LED Tail Light MOD Instructions
Thread Starter
Racer
Joined: Jan 2003
Posts: 383
Likes: 0
From: Columbia SC
LED Tail Light MOD Instructions
I have posted the step by step instructions on how to do this mod at the below URL's
This is posted in 2 parts
Part 1: http://www.littlelogcabin.com/forums...?showtopic=115
Part 2: http://www.littlelogcabin.com/forums...?showtopic=116
Many thanks to all who contributed to this and mostly to Enad for the mod he did on his Vette.
This is posted in 2 parts
Part 1: http://www.littlelogcabin.com/forums...?showtopic=115
Part 2: http://www.littlelogcabin.com/forums...?showtopic=116
Many thanks to all who contributed to this and mostly to Enad for the mod he did on his Vette.
Melting Slicks
Joined: Nov 2001
Posts: 2,668
Likes: 43
From: Eastern US XX
Re: LED Tail Light MOD Instructions (Pete76Shark)
Way, way, way too much work!!!
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
Thread Starter
Racer
Joined: Jan 2003
Posts: 383
Likes: 0
From: Columbia SC
Re: LED Tail Light MOD Instructions (Pete76Shark)
I have no night pics of this mod. I figured if I could get past the chief complaint and that is the 1157's screw in LED bulbs are not bright enough during the day then the night illumination would not be a problem. The daytime picture was taken on a sunnyday.
:cheers:
:cheers:
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Racer
Joined: Jan 2003
Posts: 383
Likes: 0
From: Columbia SC
Re: LED Tail Light MOD Instructions (Pete76Shark)
I worked on this over the weekend and my wife said the same thing [/b]pws69[/b] said, way to much work.
I said its not work, its fun.
Two things I wanted in this project. When I am showing the car I want the tail lights to be 100% original, at least to anybody viewing the car.
And I wanted the LED effect.
I got both and the starburst look was an unexpected bonus that occurs because of the original tail light lens and the LEDS are spaced out over the circuit board. I noticed the farther back the circuit board the more the starburst spreads out, another inch an I could have had it fill the whole lens but then the housing would not mount properly into the bumper I think so I left it the way it is.
Rock on
Pete
I said its not work, its fun.
Two things I wanted in this project. When I am showing the car I want the tail lights to be 100% original, at least to anybody viewing the car.
And I wanted the LED effect.
I got both and the starburst look was an unexpected bonus that occurs because of the original tail light lens and the LEDS are spaced out over the circuit board. I noticed the farther back the circuit board the more the starburst spreads out, another inch an I could have had it fill the whole lens but then the housing would not mount properly into the bumper I think so I left it the way it is.
Rock on
Pete
Team Owner
Joined: Jun 2001
Posts: 23,375
Likes: 1,066
From: Virginia USA
Re: LED Tail Light MOD Instructions (pws69)
Way, way, way too much work!!!
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
Melting Slicks
Joined: Nov 2001
Posts: 2,668
Likes: 43
From: Eastern US XX
Re: LED Tail Light MOD Instructions (theandies)
Way, way, way too much work!!!
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
I've seen those in the catalogs......how do they look/work??
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
I've seen those in the catalogs......how do they look/work??
Senior Member since 1492
Joined: Aug 2000
Posts: 87,928
Likes: 156
From: Just because I'm paranoid doesn't mean people aren't out to get me...
St. Jude Donor '09
Re: LED Tail Light MOD Instructions (theandies)
Way, way, way too much work!!!
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
I've seen those in the catalogs......how do they look/work??
I just plugged in a pair of Stylin' Concepts bulbs in place of the 1157's and I was done. Work great and absolutely no mods......
I've seen those in the catalogs......how do they look/work??
Team Owner
Joined: Dec 2000
Posts: 24,906
Likes: 0
From: Swords Check/Saws Check/Clubs Check/Claws Check/Hatred Check/Anger Check/Murmaid Check/Murder Check
Cruise-In IV Veteran
Cruise-In VI Veteran
Re: LED Tail Light MOD Instructions (Pete76Shark)
:cool: neato but not for me :leaving:
