console question ?
Thread Starter
Burning Brakes
Joined: May 2001
Posts: 988
Likes: 1
From: Dyersburg TN
console question ?
and the project continues , underneath my new console there are two brackets w/built in nuts in between the opening for the fiber opt light bar and the opening for the main bezel (a/c, ash tray , gear shift) , I can't find anything in the AIM that attaches here , what part I'm I missing now :smash:
Thanks , again
Thanks , again
Melting Slicks
Joined: Jan 2003
Posts: 3,029
Likes: 94
From: meraux LA
Re: console question ? (Todbo)
The center console attaches to the part. There are two studs which extend off of the center console which attaches to the bracket. Getting the nuts on the studs is a pain in the azz. The screws on the side pass through the pc also. :cheers:
Thread Starter
Burning Brakes
Joined: May 2001
Posts: 988
Likes: 1
From: Dyersburg TN
Re: console question ? (crf311)
thanks, I know exactly what you are talking about. :cheers: how many days did it take to build a C3 , what ever the number multiple it by 100 for my completion time :crazy:
Burning Brakes
Joined: Jul 2003
Posts: 888
Likes: 0
From: Angola IN
CI 5-6-7-8-9 Veteran
Cruise-In 7 Car Show Winner
Re: console question ? (crf311)
:iagree:
And yes the guage consol is a major PITA!! I worked for 1 hour on the PS nut, before I called my wife out with her small hands!! :) She had both of them done in about 15 minutes. She is also the one who will be putting the outside door latches back in, I can't get my hands up there!!
Frank
And yes the guage consol is a major PITA!! I worked for 1 hour on the PS nut, before I called my wife out with her small hands!! :) She had both of them done in about 15 minutes. She is also the one who will be putting the outside door latches back in, I can't get my hands up there!!
Frank
Melting Slicks
Joined: Feb 2004
Posts: 2,111
Likes: 32
From: Damascus MD
Re: console question ? (standup)
If this is an A/C car, I believe their are no cables.
Yes the console is a royal PITA. You may want to try disconnecting them from the vent and preattaching them to the console depending on how far you have the interior taken apart.
Yes the console is a royal PITA. You may want to try disconnecting them from the vent and preattaching them to the console depending on how far you have the interior taken apart.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Burning Brakes
Joined: May 2001
Posts: 988
Likes: 1
From: Dyersburg TN
Re: console question ? (1974ta)
If this is an A/C car, I believe their are no cables.
Yes the console is a royal PITA. You may want to try disconnecting them from the vent and preattaching them to the console depending on how far you have the interior taken apart.
Yes the console is a royal PITA. You may want to try disconnecting them from the vent and preattaching them to the console depending on how far you have the interior taken apart.
everytime I think I've got thru with the pita project another comes along , I know I've had parts of the console in and out half dozens times , trying to fig what parts need to go in which order.