Alignment Specs
Thread Starter
Racer
Joined: Jan 2004
Posts: 377
Likes: 1
From: Anchorage Alaska
Alignment Specs
I have added a Muskegan Composite spring and 17" Cragar's w/255/50WR17 RE750's (very close to original tire diameter). I will be adding (as soon as they get here) VBP's struts. Can someone tell me what specifications I should use when having a four wheel alignment done? Stock numbers, or is there something better that will provide better tracking with minimal tire wear? :cheers:
Le Mans Master
Joined: Mar 2002
Posts: 6,217
Likes: 1
From: End of the Ike IL
Cruise-In V Veteran
Cruise-In VI Veteran
Re: Alignment Specs (73 Vet)
Vette Brakes has some good reference material on its site.
http://www.vbandp.com/instructions/h...ruct/align.htm
http://www.vbandp.com/instructions/h...ruct/align.htm
Race Director
Joined: Sep 1999
Posts: 11,361
Likes: 383
From: Plano TX
Re: Alignment Specs (73 Vet)
Here are the settings I've found work well for street driving with even wear:
Front
Camber: -0.25
Caster: As much as you can get. About 2.5-3 dgr with stock control arms. 4.5 with tubular.
Toe-In: 1/8
Rear:
Camber: -0.5
Toe-In: 1/8
Front
Camber: -0.25
Caster: As much as you can get. About 2.5-3 dgr with stock control arms. 4.5 with tubular.
Toe-In: 1/8
Rear:
Camber: -0.5
Toe-In: 1/8
