OT daily driver oxegen sensor
Thread Starter
Instructor
Joined: Apr 2001
Posts: 193
Likes: 0
From: Wausau wis USA
OT daily driver oxegen sensor
On my 96 geo tracker I bought anew oxegen sensor thewires are diffrent colors on car 2black 1 grey 1 blue
on sensor 2white 1black 1grey
any ideas on how to hook them up or know where to look Thankes
on sensor 2white 1black 1grey
any ideas on how to hook them up or know where to look Thankes
Race Director
Joined: Sep 1999
Posts: 11,358
Likes: 379
From: Plano TX
Re: OT daily driver oxegen sensor (MILO851)
Should be ok as long as the connector is correct.
The 4 wire sensors have the following:
Heater + and -. Usually 2 whites, but could be 2 black. Polarity doesn't matter so both wires are the same color.
Signal and signal ground. Signal is usually grey. Ground can be black or blue.
The 4 wire sensors have the following:
Heater + and -. Usually 2 whites, but could be 2 black. Polarity doesn't matter so both wires are the same color.
Signal and signal ground. Signal is usually grey. Ground can be black or blue.
