DIN Radio Installation
Thread Starter
Instructor
Joined: Dec 2002
Posts: 242
Likes: 0
From: Port Orchard Washington
DIN Radio Installation
Some info if anyone wants to do this:
Go to http://www.americaninternational.net . The DIN adapter is P/N FP-306 for 68-76 vettes. Looks good, no trimming to fit. Cost is $17 plus shipping.
Hope this helps.
Go to http://www.americaninternational.net . The DIN adapter is P/N FP-306 for 68-76 vettes. Looks good, no trimming to fit. Cost is $17 plus shipping.
Hope this helps.
Race Director
Joined: Sep 1999
Posts: 11,358
Likes: 379
From: Plano TX
Re: DIN Radio Installation (Missileman)
I have it and it looks nice. But you still have to cut out the bezel, though. Not a big deal to me, but some people get all bent out of shape about their bezel no longer being "original".
Thread Starter
Instructor
Joined: Dec 2002
Posts: 242
Likes: 0
From: Port Orchard Washington
Re: DIN Radio Installation (burners)
burners: click the link on the part number and the whole Chevy catalog comes up in Adobe. Page down near the bottom.
zwede: yes the console still needs to be cut. No trimming on the adapter plate, though. With repo consoles going for $120, the next owner can buy one if they want.
zwede: yes the console still needs to be cut. No trimming on the adapter plate, though. With repo consoles going for $120, the next owner can buy one if they want.
Safety Car
Joined: Mar 2002
Posts: 4,366
Likes: 7
From: Las Vegas NV
Re: DIN Radio Installation (Missileman)
This thread has some pics of my install (and how I did the install)...I used the FP-306 faceplate
http://forums.corvetteforum.com/zerothread?id=808211
http://forums.corvetteforum.com/zerothread?id=808211
