VERY nice TT, I'm sure you'll find lots of work for it 
I got myself a....
Thread Starter
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
I got myself a....
blasting cabinet 
It's pretty big, a whole engine will fit in there, has a sturdy frame and a thick grate so it can hold some heavy parts.
Picture is crap but it's taken w/ a vid cam w/o flash (don't have a decent digital camera)
It's pretty big, a whole engine will fit in there, has a sturdy frame and a thick grate so it can hold some heavy parts.Picture is crap but it's taken w/ a vid cam w/o flash (don't have a decent digital camera)
Last edited by Twin_Turbo; Oct 28, 2004 at 03:10 PM.
Thread Starter
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
Yes my compressor is big enough, in fact the blue thing next to it is my compressor, home built from an army surplus tank The compressor will easily deliver 160psi and a lot of flow, it's a 2 cyl. and the electro motor is a 380V unit.
I don't have a plasma cutter, I almost bought one but it was pick up, no shipping and it was a 300 mile drive (one way), I didn't want to drive that far for it.
The compressor will easily deliver 160psi and a lot of flow, it's a 2 cyl. and the electro motor is a 380V unit.I don't have a plasma cutter, I almost bought one but it was pick up, no shipping and it was a 300 mile drive (one way), I didn't want to drive that far for it.
Safety Car
Joined: Aug 2000
Posts: 3,711
Likes: 43
From: San Antonio TX
Originally Posted by MEGLADON
NICE 
The only things I am missing
in my garage, is a plasma cutter...
The only things I am missing
in my garage, is a plasma cutter...
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Race Director
Joined: Dec 1999
Posts: 16,945
Likes: 9
I'm pretty well stocked in the pneumatic equipment and I have a 4 post Koni lift but will install that one in the new shop because it has no 2nd floor like this one and it's bigger, the new shop will also have a much thicker floor to support it properly.
