Bladder Problems!!!
Thread Starter
Racer
Joined: May 2004
Posts: 385
Likes: 1
From: Olalla Wa
Bladder Problems!!!
Now that I've got your attention...I pulled the bottom of my 91 sport seats because the bladders haven't been working. The problem is the lines which run into a plastic coupler have snapped off. Anyone have experience with this? Can I bypass this coupler,or can a new one be purchased 
Race Director<br><img src="/forums/images/ranks/7k-10k.gif" border="0">
Joined: Feb 2001
Posts: 13,013
Likes: 26
From: HOME OF THE FREE. BECAUSE OF OUR BRAVE. Babylon NY
St. Jude Donor '06 thru '20
The coupler can be bypassed. I looked for a coupler for a long time with no luck.
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
If it's an in line coupler (1in & 1out) you could use a vacuum line coupler from AutoZone.
For a 1in to 3out, you might try an aquarium supply house.
Also JB Quick Weld is great for joining plastic pieces.
For a 1in to 3out, you might try an aquarium supply house.
Also JB Quick Weld is great for joining plastic pieces.
