jmillerga

Anyone know where you can get a glove box conversion to replace the bread box on an 84

thornton310

Mid America Motorworks

http://www.madvet.com/shop?frame=3.54.1027

randy814u

mid-america, ecklers, ebay

jmillerga

Those are all just replacement panels, I'm looking for an actual glove box you can open and store goodies in.

zaragoza

I don't think that they make one. But it would be a good project.

thornton310

that wont work because of the wiring behind the breadbox.

nelson84

Are you going to put gloves in it?

thomastl

Mine has a flat panel and there is very little room behind it. Certainly not enough for a box. The air duct to the far right side takes up a lot of room.

corvetteronw

I replaced mine with a flat panel. I gave the breadbox toa Forum member who was going to experiment with making a prototype glove box out of it. I forgot his name but maybe he will chime in here.
Here is a pic of what is behind it. The gray box in the middle is the VATS control module.

Insane1

Glovebox

Another

jmillerga

Thats what I'm looking for, now to try and find the manufacture so I could get a new one

Pete K

I remember that they sold for $200 new. I heard they were discontinued. If you find a new source, please let me know. I want one. I can hide electronics in it. NOS switches etc.

nelson84

You could put your weed in there.

Goliath69

[QUOTE=Pete K;1553934773]I remember that they sold for $200 new. I heard they were discontinued. If you find a new source, please let me know. I want one. I can hide electronics in it. NOS switches etc.[/QUOTE
Any idea who has the molds or do you have a picture you can send me please