Privacy Screen
Thread Starter
Instructor
Joined: Apr 2007
Posts: 160
Likes: 0
From: N Canton Ohio
Privacy Screen
Has anyone done anything to the privacy screen that pulls out to cover the rear storage area? I was at a show in Lancaster, Oh this weekend and saw some cool logo's on this sreen. I'd like to add something to mine without replacing it. Any Ideas or pictures?
Thread Starter
Instructor
Joined: Apr 2007
Posts: 160
Likes: 0
From: N Canton Ohio
Thanks! I used Permanent stick on letters i bought at a craft store. They are made by Headline sign (headlinesign.com). They are vinyl, very thin and have an adhesive back. I sprayed the cover with water and 2 drops of dishwashing soap ( this enables you to move the letters around). Once it dries that's it. You can actually see the "grains" of the screen through the letters so one would think they are going to hold up. I'll wait a couple weeks and may border the letters with the Chevy Bow tie using pinstriping.
Race Director
Joined: Dec 2002
Posts: 13,348
Likes: 233
From: SCMR Rat Pack'r Charter Member..Great Bend KS
Very nice, Hondo!
(...even though it's stating the obvious.) How about using the same method, but putting on your CorvetteForum name instead? LIke this, maybe:
xxxxxxxxxxxxxxxxxxxxxxxxCORVETTEFORUM.com
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxHondo48
Just don't mess it up by trying to put a bowtie on it..........
larry
code5coupe
__________
not easily impressed....
(...even though it's stating the obvious.) How about using the same method, but putting on your CorvetteForum name instead? LIke this, maybe:
xxxxxxxxxxxxxxxxxxxxxxxxCORVETTEFORUM.com
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxHondo48
Just don't mess it up by trying to put a bowtie on it..........
larry
code5coupe
__________
not easily impressed....
Last edited by rocco16; Aug 6, 2007 at 10:29 AM.
Safety Car
Joined: Jul 2004
Posts: 3,835
Likes: 30
Very nice, Hondo!
(...even though it's stating the obvious.) How about using the same method, but putting on your CorvetteForum name instead? LIke this, maybe:
xxxxxxxxxxxxxxxxxxxxxxxxCORVETTEFORUM.com
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxHondo48
Just don't mess it up by trying to put a bowtie on it..........
larry
code5coupe
__________
not easily impressed....
(...even though it's stating the obvious.) How about using the same method, but putting on your CorvetteForum name instead? LIke this, maybe:
xxxxxxxxxxxxxxxxxxxxxxxxCORVETTEFORUM.com
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxHondo48
Just don't mess it up by trying to put a bowtie on it..........
larry
code5coupe
__________
not easily impressed....
".......excellent but will it stand up to extreeme heat (florida) and being rolled and unrolled?"
and here were your answers;
"A. He doesn't know, since he just did this a few days ago.
B. He doesn't care, since he lives in Ohio."
...thanks again!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Thread Starter
Instructor
Joined: Apr 2007
Posts: 160
Likes: 0
From: N Canton Ohio
[QUOTE
CORVETTEFORUM.com
Hondo48
Just don't mess it up by trying to put a bowtie on it.......... ][/QUOTE]
That's a thought but I always think" Re-sale" someday. I agree, the "Bowtie" was a thought but "Keep it simple stupid" makes sense. Time will tell on how this holds up but the last couple weeks in Ohio have been as hot as Florida. It rolls up fine.
CORVETTEFORUM.com
Hondo48
Just don't mess it up by trying to put a bowtie on it.......... ][/QUOTE]
That's a thought but I always think" Re-sale" someday. I agree, the "Bowtie" was a thought but "Keep it simple stupid" makes sense. Time will tell on how this holds up but the last couple weeks in Ohio have been as hot as Florida. It rolls up fine.
Race Director
Joined: Dec 2002
Posts: 13,348
Likes: 233
From: SCMR Rat Pack'r Charter Member..Great Bend KS
I'm trying to turn over a new leaf, don'tchaknow.....
Larry
code5coupe
___________
(still) not easily impressed....
Safety Car
Joined: Jul 2004
Posts: 3,835
Likes: 30
You don't see it because ten seconds after posting it I read it and decided I was being too much of an azzhat....so I changed it to something "kinder and gentler".
I'm trying to turn over a new leaf, don'tchaknow.....
Larry
code5coupe
___________
(still) not easily impressed....
I'm trying to turn over a new leaf, don'tchaknow.....
Larry
code5coupe
___________
(still) not easily impressed....
and i was only expressing an interest as to the "modification" and to it's durability..
Melting Slicks
Joined: May 2005
Posts: 3,053
Likes: 0
From: OREGON
You don't see it because ten seconds after posting it I read it and decided I was being too much of an azzhat....so I changed it to something "kinder and gentler".
I'm trying to turn over a new leaf, don'tchaknow.....
Larry
code5coupe
___________
(still) not easily impressed....
I'm trying to turn over a new leaf, don'tchaknow.....
Larry
code5coupe
___________
(still) not easily impressed....
hey larry, for some reason he has a problem with everyone
btw, looks great
Safety Car
Joined: Jul 2004
Posts: 3,835
Likes: 30
Melting Slicks
Joined: May 2005
Posts: 3,053
Likes: 0
From: OREGON
Thread Starter
Instructor
Joined: Apr 2007
Posts: 160
Likes: 0
From: N Canton Ohio
OK Guys, Here's an update: The vinyl letters are, in fact, lifting after 4 days of heat and being un-rolled. I'll go to plan "B" and investigate some paint using stencils.
I am new to this forum but appreciate the fact that it offers a place for people of common interests to share ideas and information. My intentions were to share an idea. No doubt someone will "Build a better mouse trap" and pass it on.
Let's keep this fun and informative and...............MATURE!
I am new to this forum but appreciate the fact that it offers a place for people of common interests to share ideas and information. My intentions were to share an idea. No doubt someone will "Build a better mouse trap" and pass it on.
Let's keep this fun and informative and...............MATURE!
Last edited by Hondo48; Aug 7, 2007 at 07:31 AM.
Melting Slicks
Joined: May 2005
Posts: 3,053
Likes: 0
From: OREGON
OK Guys, Here's an update: The vinyl letters are, in fact, lifting after 4 days of heat and being un-rolled. I'll go to plan "B" and investigate some paint using stencils.
I am new to this forum but appreciate the fact that it offers a place for people of common interests to share ideas and information. My intentions were to share an idea. No doubt someone will "Build a better mouse trap" and pass it on.
Let's keep this fun and informative and...............MATURE!
I am new to this forum but appreciate the fact that it offers a place for people of common interests to share ideas and information. My intentions were to share an idea. No doubt someone will "Build a better mouse trap" and pass it on.
Let's keep this fun and informative and...............MATURE!
