Quarter Panel Replacement
Thread Starter
Pro
Joined: Jan 2010
Posts: 611
Likes: 28
From: Olympia WA
Quarter Panel Replacement
Can someone please, please tell me the process in which to replace the rear quarter panels on a c4 or at least point me in the right direction. I've looked and looked with not much luck, including this forum. The best I can find is a cd from zip for 50 bucks. Any help would be real helpful. Thanks.
Race Director
Joined: Sep 2003
Posts: 16,838
Likes: 341
From: Database Error Indiana
After removing the rear bumper, the rear inner wheelwells, the gas door and the little belt line trim you can start seperating the 1/4 panel at the bond points. You can use a wood chisel or a sharp putty knife along the door jam edge and under the halo cover. There is also a metal brace that hooks up under the cover. On the driver side remove the antenna too. At the back under the gas door you can cut it where you will need to make a lap joint. Open the hatch, remove the plastic trim and the sunshade, then seperate the panel from the interior with the chisel. Clear as mud but its not easy to describe....
Last edited by JackDidley; Jun 10, 2010 at 09:21 PM.
Thread Starter
Pro
Joined: Jan 2010
Posts: 611
Likes: 28
From: Olympia WA
