Momo Shift Knobs
Thread Starter
Drifting
Joined: Mar 2002
Posts: 1,444
Likes: 2
From: lakeview new york
Cruise-In IV Veteran
Momo Shift *****
Anyone have a picture of a C4 with a Momo **** installed? I was thinking of maybe a yellow/black or yellow/aluminum. Or do you think it would look like sh**?
Melting Slicks
Joined: Jan 2000
Posts: 3,418
Likes: 1
From: NW Chicago Suburbs
Re: Momo Shift ***** (stinger95)
I installed one on my new Hurst shifter. It sits about an inch higher than the stock ****, if you install a Momo on a stock shifter it is going to be a very tall shifter. I can't imagine how long the shifter throw will be with a Momo on a stock shifter, but it's going to be LOOOOONG.
Eric
Eric
Drifting
Joined: Dec 1999
Posts: 1,751
Likes: 14
From: Wyckoff NJ
Re: Momo Shift ***** (stinger95)
I installed a two tone red/black Momo stift ****.It sat very high so I kept cutting the stick in car untill I was happy w/ the height.looks great!!If u leave the height stock it will look like a truck shifter. :eek:
Burning Brakes
Joined: Sep 2001
Posts: 1,011
Likes: 0
From: Jupiter Florida
Re: Momo Shift ***** (vettes)
I installed a two tone red/black Momo stift ****.It sat very high so I kept cutting the stick in car untill I was happy w/ the height.looks great!!If u leave the height stock it will look like a truck shifter. :eek:
[Modified by rocketfinger, 5:10 PM 5/24/2002]
Melting Slicks
Joined: Jan 2000
Posts: 3,418
Likes: 1
From: NW Chicago Suburbs
Re: Momo Shift ***** (rocketfinger)
It uses set screws. I'm thinking about purchasing a second Hurst and having it machined so the Momo can sit lower like the stock ****. I really like the feel of my F-16, the red matches my interior :cool:
Eric
Eric
Melting Slicks
Joined: Jan 2000
Posts: 3,418
Likes: 1
From: NW Chicago Suburbs
Re: Momo Shift ***** (vettes)
...If u leave the height stock it will look like a truck shifter. :eek:
Eric
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
10 Most Common Corvette Problems of the Last 20 Years!
Joe Kucinski
5 MOST and 5 LEAST Popular Corvette Model Years in History!
Joe Kucinski
2027 Corvette Buyer's Guide: Everything You Need to Know!
Joe Kucinski
Thread Starter
Drifting
Joined: Mar 2002
Posts: 1,444
Likes: 2
From: lakeview new york
Cruise-In IV Veteran
Re: Momo Shift ***** (USAZR1)
"Why not have your stock leather **** re-upholstered in the color of your choice? That's what I did."
Got any pics? Anyone?
Got any pics? Anyone?
Race Director
Joined: Oct 2001
Posts: 12,555
Likes: 4
From: Fear causes hesitaiton...and hesitation will cause your worst fears to come true. Houston TX
Cruise-In IV Veteran
Cruise-In VII Veteran
Re: Momo Shift ***** (USAZR1)
Why not have your stock leather **** re-upholstered in the color of your choice? That's what I did.
Where would someone get that done, an upholstery shop? :confused:
Drifting
Joined: Dec 1999
Posts: 1,751
Likes: 14
From: Wyckoff NJ
Re: Momo Shift ***** (rocketfinger)
So you just get in there with the angle-grinder and do yo' thang, huh?
Does the reverse lockout stay where it is, or did you pitch that?
Does the reverse lockout stay where it is, or did you pitch that?
I just got a hacksaw and cut till I liked the look. :chevy
