need advice
Thread Starter
Advanced
Joined: Jan 2004
Posts: 74
Likes: 0
From: midland tx
need advice
which would be better
A late model vortec roller motor w/ a vortec tpi intake stock otherwise or....A bonestock 400 w/a comp xe256-12 and a stock tpi manifold Just looking to get this thing running.BTW I have both setups in my shop also which would require less tuning if any at all
A late model vortec roller motor w/ a vortec tpi intake stock otherwise or....A bonestock 400 w/a comp xe256-12 and a stock tpi manifold Just looking to get this thing running.BTW I have both setups in my shop also which would require less tuning if any at all
Race Director
Joined: Sep 2000
Posts: 17,298
Likes: 33
From: The Top of Utah
As far as heads fitting, a small block is a small block. The 400 can be converted to take factory roller cam parts, with an OE lifter change, or you can use a retro roller set up. For less money you can retain the flat tappet cam in the 400.
RACE ON!!!
RACE ON!!!
