thread lock recommendations?

Reply Subscribe

Thread Tools

Search this Thread

May 11, 2005 | 09:35 PM

1987C4

Thread Starter

Instructor

Joined: Jun 2004

Posts: 234

Likes: 0

From: 1987- L98, auto OH

thread lock recommendations?

I'm reinstalling my driveshaft tomorrow. I have a supply of the blue medium strength thread lock for the u-joint retaining bolts. I was wondering what you all have been using on yours? Is the blue medium strength enough or do I need to use the heavy duty red stuff?

Thanks for any replies!
Brad

May 11, 2005 | 09:46 PM

bogus

Team Owner

Joined: Aug 2000

Posts: 40,156

Likes: 45

From: San Pedro CA

that should be ok.

May 11, 2005 | 10:29 PM

M.Clough

Instructor

Joined: Feb 2005

Posts: 125

Likes: 0

From: york pa

use the blue if you use the red and have to remove at a later date you are going to have fun

May 11, 2005 | 10:30 PM

Midnight 85

Le Mans Master

Joined: May 2004

Posts: 5,866

Likes: 60

From: Hellinois

Finalist 2020 C4 of the Year - Modified

Red should only be used on fasteners that you will not be wanting to come apart for quite some time. Blue is perfect for what you're doing.

May 11, 2005 | 10:48 PM

bogus

Team Owner

Joined: Aug 2000

Posts: 40,156

Likes: 45

From: San Pedro CA

Red is great for flywheels and clutches... things like that.

May 11, 2005 | 11:46 PM

1987C4

Thread Starter

Instructor

Joined: Jun 2004

Posts: 234

Likes: 0

From: 1987- L98, auto OH

Thanks guys! I appreciate the replies. I used some of the red on the rear drive axle u-joint bolts. Wow! When I went to check their torque later, they were really tight (hadn't budged at all!)! Thought better about what I use on the driveshaft bolts this time around! Again, thanks!

Reply Subscribe