Heads and cam

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2005 | 02:02 PM

fredk

Thread Starter

Burning Brakes

Joined: May 2005

Posts: 920

Likes: 56

From: Muskoka Ontario

Heads and cam

Well I had a good day on my 93 in the garage today. Timing cover is on, oil pan and thanks for the tip on rotating the crank, it sure helped. Got my adapter hub on, I hope it bottomed out and also the damper. Friday hopefully the water pump and then the lifters and heads.

Fred

Dec 29, 2005 | 02:28 PM

STL94LT1

Race Director

Joined: Jan 2002

Posts: 12,263

Likes: 86

From: O'Fallon Missouri

Good luck, keep us updated.

Dec 29, 2005 | 10:01 PM

Lichen

Melting Slicks

Joined: Nov 2002

Posts: 2,471

Likes: 2

From: 1993 Quasar Blue 'vert Scottsdale AZ

Good luck and find yourself a good tuner. That stock chip will be worthless.

Dec 30, 2005 | 09:06 AM

fredk

Thread Starter

Burning Brakes

Joined: May 2005

Posts: 920

Likes: 56

From: Muskoka Ontario

I plan on trying Alvin at PCM. I was planning on getting the intake port matched and the injectors cleaned and blueprinted, any comments ????

Thanks
Fred

Dec 30, 2005 | 11:24 AM

fredk

Thread Starter

Burning Brakes

Joined: May 2005

Posts: 920

Likes: 56

From: Muskoka Ontario

Will I get a good enough torque reading on my head bolts if the temperature in my garage is about 40 degrees or should I rent a heater before I install my heads on my 93 ?????

Reply Subscribe