Cut lid
Thread Starter
Race Director
Joined: Dec 2005
Posts: 13,515
Likes: 12
From: Fisher, IL
Cut lid
I just bought my 96 LT1 and i hear from most people that a cut lid is better then stock. I was just wondering if anyone had pictures or steps that i can follow to do it myself. I didn't want to spend a lot of money on one if i can do it. I have a dremil but don't know how much to cut. I also plan on buying a K and N filter once i do this. I may not get any noticable gains in HP but that doesn't matter to me now. All i have done to the car is get ride of the mufflers.
I looked but couldn't find any other directions on this site. If you have a link of where i could find it that would be nice too.
I looked but couldn't find any other directions on this site. If you have a link of where i could find it that would be nice too.
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
I've got a '95 one (same part) that's been beautifully cut. It looks like it came that way. If yours is in excellent condition, I'll trade with you.
Burning Brakes
Joined: Dec 2005
Posts: 805
Likes: 11
From: Hickory Flat Ga
I found the K&N fit badly in the cut lid. It comes with some foam stuff to attempt a seal but it just didn't close and seal completely.
Careful with it. Also it's real easy to cut the lid. And it makes a little sotp difference.
Careful with it. Also it's real easy to cut the lid. And it makes a little sotp difference.
Thread Starter
Race Director
Joined: Dec 2005
Posts: 13,515
Likes: 12
From: Fisher, IL
Originally Posted by Corvette Kid NC
I've got a '95 one (same part) that's been beautifully cut. It looks like it came that way. If yours is in excellent condition, I'll trade with you.
Thread Starter
Race Director
Joined: Dec 2005
Posts: 13,515
Likes: 12
From: Fisher, IL
Also it's real easy to cut the lid. And it makes a little sotp difference.[/QUOTE]
Done. Didn't take me too long once i found the right tool. I didn't cut as much as the picture that was given but it is close. and i didn't worry too much about how good it looks. So i have some edges that are still sharp but o well. As for the k & N filter. what other brands would you recomend. I know all the stores carry Fram but i didn't go to a Auto parts store yet. They might carry something else.
Done. Didn't take me too long once i found the right tool. I didn't cut as much as the picture that was given but it is close. and i didn't worry too much about how good it looks. So i have some edges that are still sharp but o well. As for the k & N filter. what other brands would you recomend. I know all the stores carry Fram but i didn't go to a Auto parts store yet. They might carry something else.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Originally Posted by tparkhi2
I better not. the shipping wouldn't be worth the effort. plus i if i can do it myself then the whole reason is becasue i can save money. Sorry but i wish i would help you. maybe someone in your area would be happy to help. I truely am sorry.
, Impala B, I'll be in touch.