Experts (Marcho) needed....
Thread Starter
Former Vendor
Joined: Jun 2001
Posts: 7,204
Likes: 6
From: St Marys PA
Experts (Marcho) needed....
Hey guys I have posted my scanner results on my web. I was wondering if you could give me some insight to what they are telling me. I would greatly appreciate it. Thanks a million.
Le Mans Master
Joined: Mar 1999
Posts: 9,663
Likes: 1,682
From: Fort Worth Texas
2024 Corvette of the Year Finalist - Unmodified
2023 C8 of the Year Winner - Unmodified
2020 Corvette of the Year Finalist (stock)
2019 C7 of Year Winner (stock)
Former Moderator
Cruise-In I-II-III Veteran
Re: Experts (ski_dwn_it)
There is something wrong with the page. If you are interested I would be happy to send it to you. Sorry about the glitch.
Email it to me! cmarcho@swbell.net
I'll take a look at it....
Race Director
Joined: Mar 1999
Posts: 12,597
Likes: 237
From: Bartlett Illinois
Re: Experts (ski_dwn_it)
First quick glimpse shows that you are running rich in a few area's mainly at Idle and in some areas Deceleration.
I would try to get the BLM's to be close to 128 across the rpm range. I belive GM manual states that the BLM should be at 128 +/- 8
I have a question too, What software are you useing to get the info?
I use Ease and was just curious. I am assuming the BLM Fine is actually the Integrator correct?
I would try to get the BLM's to be close to 128 across the rpm range. I belive GM manual states that the BLM should be at 128 +/- 8
I have a question too, What software are you useing to get the info?
I use Ease and was just curious. I am assuming the BLM Fine is actually the Integrator correct?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Former Vendor
Joined: Jun 2001
Posts: 7,204
Likes: 6
From: St Marys PA
Re: Experts (ZylaRace)
The info has been sent to those that requested the info. I am using Craige's software. I have been very impressed with the software. Lots of info, just wish I knew what I was looking at 
I know some, but this should help with the learning curve. Any help would be appreciated. Oh yeah I wanted to thank those that have already helped and also a thank to you craige for developing the software and making it available to us all. Thanks.
I know some, but this should help with the learning curve. Any help would be appreciated. Oh yeah I wanted to thank those that have already helped and also a thank to you craige for developing the software and making it available to us all. Thanks.
Thread Starter
Former Vendor
Joined: Jun 2001
Posts: 7,204
Likes: 6
From: St Marys PA
Re: Experts (Aaron's 87)
I made the cable. It was really easy to make. Probably cost me ~10.00 if that. I tried to use Freescan first, but it wouldn't connect. Thought it might have been the new laptop or the cable, so I changed to a new program (craiges) it hooked right up! WooooHoooo! After seeing everything his software offered, glad the freescan didn't work. I guess that isn't fair to say. Freescan could be a very nice package, Sorry. Bu yes I built my own cable off Andrews page. IF you need the scematic I might be able to find it and send it. But you can find it on thirdgen tech article about programming proms under the electric section. God luck.