Plug wire question.
Sep 22, 2006 | 03:44 PM
Sep 23, 2006 | 03:05 PM
Thread Starter
Burning Brakes
Joined: May 2001
Posts: 1,036
Likes: 0
From: Plant City Fl
Sep 23, 2006 | 03:35 PM
Burning Brakes
Joined: Jun 2005
Posts: 1,191
Likes: 15
From: Wallingford Vermont
I have used those (Blue Max) in the past. They were OK but after three seasons I had leaks. Even though the resistance checked within spec for each wire, voltage was shorting out on the Air Injection tubes causing a misfire. In the dark you see the sparks jump.
I currently use MSD wires. I also get the HEI universal set and cut to my own wire lengths. I never could find a wire set (even AC Delco) that would fit well.
Sep 23, 2006 | 04:08 PM
Racer
Joined: Aug 2005
Posts: 336
Likes: 3
From: State of Confusion
Check this web site out,
www.magnecor.com , this site will tell you everything you always wanted to know about spark plug wires.
Sep 25, 2006 | 11:56 AM
Joined: May 2006
Posts: 718
Likes: 1
From: Riviera Beach FL
Yes,they are good wires, no fads or gimmicks. My set has lasted over 50,000 miles with no problems.
Sep 25, 2006 | 12:04 PM
Thread Starter
Burning Brakes
Joined: May 2001
Posts: 1,036
Likes: 0
From: Plant City Fl
Quote:
Originally Posted by MATCHLIGHT
Check this web site out,
www.magnecor.com , this site will tell you everything you always wanted to know about spark plug wires.
Thanks, lots of good info there.
Sep 25, 2006 | 12:28 PM
Le Mans Master
Joined: Oct 2003
Posts: 6,130
Likes: 2
From: seattle WA
I've had good luck just using the Belden wires from NAPPA, perfect length and I think they were around $45.
Sep 25, 2006 | 04:43 PM
Racer
Joined: Aug 2002
Posts: 386
Likes: 0
From: Lancaster Lancashire
I use the Blue Max wires with a Performance Distributors HV coil, module, rotor and cap. No problems yet.
Dave
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Sep 25, 2006 | 07:07 PM
Racer
Joined: Jul 2004
Posts: 285
Likes: 0
From: San Diego CA
I agree with Macthlight and Danz51 - you cannot go wrong with magnacor or MSD
I'm runnnig MSD 8.5 super conductors (with 6A box and coil).......
Sep 25, 2006 | 08:12 PM
Le Mans Master
Joined: Feb 2002
Posts: 7,858
Likes: 2
I am currently running the 8mm Moroso Blue Max wires on my '95 with good results.