Could you pm me also with a price to build one. Do you know how much lighter it is than the stock tank?
Fuel cell pics
Thread Starter
Drifting
Joined: Aug 2001
Posts: 1,500
Likes: 0
From: Holliston MA
Cruise-In VII Veteran
Thanks everybody. I enjoy the hell out of aluminum TIG.
I finally figured out why I was shorting out the in-tank pumps today. The stock gas tank has a heavy guage inner plastic liner, well really another gas tank, inside the metal skin. Water had filled up between the 2 tanks and was sloshing in through the opening where the sending unit goes. When I cut the tank up to throw it out, 2 gallons of water had to have come out.
Hopefully the rain will stay away this weekend. I want to spray this thing for a full pass, and hopefully get the 250 jets in.
I finally figured out why I was shorting out the in-tank pumps today. The stock gas tank has a heavy guage inner plastic liner, well really another gas tank, inside the metal skin. Water had filled up between the 2 tanks and was sloshing in through the opening where the sending unit goes. When I cut the tank up to throw it out, 2 gallons of water had to have come out.
Hopefully the rain will stay away this weekend. I want to spray this thing for a full pass, and hopefully get the 250 jets in.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Mar 2001
Posts: 30,856
Likes: 293
From: Boston, Dallas, Detroit, SoCal, back to Boston MA
Originally Posted by SloRvette
I finally figured out why I was shorting out the in-tank pumps today. The stock gas tank has a heavy guage inner plastic liner, well really another gas tank, inside the metal skin. Water had filled up between the 2 tanks and was sloshing in through the opening where the sending unit goes. When I cut the tank up to throw it out, 2 gallons of water had to have come out.