ABS issue on 91 resolved
Thread Starter
Instructor
Joined: Nov 2006
Posts: 188
Likes: 0
From: Ripon CA
ABS issue on 91 resolved
Well, my ABS issue has been fixed. I was getting a Service ABS light and the codes pointed to the right wheel sensor. To make a long story short it ended up being the wiring from the right wheel sensor had melted where it ran near the exhaust. Apparently, the retainers had come out and the wiring had come in contact with the exhaust and melted. Replaced about a 3' section of wiring, encased in new wire loom and securely mounted it up away from the exhaust. Everything works fine now.
Thanks to everyone who provided their input.
Mark
Thanks to everyone who provided their input.
Mark
